Dan McKenna

This can be caused by a few things.  1.  The scheduled on times are not correct  2. The Astro Time Clock below the schedule is not checked  3. The offsets on the Astro Time Clock are set to high ca...

  Are the lights being controlled by the astronomical clock?  If not, should they be?  This feature will turn the lights on when the sun goes down and off when it comes up, so you don't have to wo...

1. If you do not have clearance to make set point or schedule changes, please contact your supervisor for access 2. Trying to make a cooling setpoint change, make sure to save the change when compl...

Note* Using the guide attached follow the path given below From in front of the controller press the right arrow until the screen reads “Manual” Press enter At this point it may ask for a 4 digit ...

There are a few different methods to access your system via chameleon Cloud depending on which device you’re using at the time.  Our web application can be accessed on your favorite browser by goin...

1. Pull the flap on the front of the stat down exposing all of the settings buttons. 2. Press "run schedule" and "copy" at the same time. 3. Scroll through the options with the "i" button just bel...

To subscribe to alarms and alerts, go to the Settings/Alarms tab, add the email address you would like to receive alarms and/or the phone number you would like to receive SMS alerts, choose the ale...

First log into your account on https://retail.eviewiot.com/ or your eViewIoT app and verify if the zone that is not coming on is scheduled to be on via the schedule tab. If lights are not schedule...

Here are various tips to help diagnose and reduce issues with walk-in cooler/freezers:   Make sure doors close properly and all seals are in good condition Make sure coils are clean and free of ic...

Here is an example of a normal 5am to 10pm lighting schedule, without using astro scheduling. The slider on the left, slanting left, represents a zone or locations "OPEN" time  and the slider on ...