Dan McKenna

Your username is your email address, or the username issued when your account was created.If you know your current passwordLog into retail.eviewiot.com.Click the Settings gear in the top right.Choo...

You can turn a lighting zone on outside its normal schedule for a health inspection, a contractor visit, or after-hours work.Important: the override expires on its ownLighting overrides in eViewIoT...

If your lights come on or go off a few minutes earlier or later each day, or drift over the course of the year, your zone is almost certainly running on the Astro Time Clock. That setting ties the ...

This can be caused by a few things.  1.  The scheduled on times are not correct  2. The Astro Time Clock below the schedule is not checked  3. The offsets on the Astro Time Clock are set to high ca...

  Are the lights being controlled by the astronomical clock?  If not, should they be?  This feature will turn the lights on when the sun goes down and off when it comes up, so you don't have to wo...

1. If you do not have clearance to make set point or schedule changes, please contact your supervisor for access 2. Trying to make a cooling setpoint change, make sure to save the change when compl...

Note* Using the guide attached follow the path given below From in front of the controller press the right arrow until the screen reads “Manual” Press enter At this point it may ask for a 4 digit ...

There are a few different methods to access your system via chameleon Cloud depending on which device you’re using at the time.  Our web application can be accessed on your favorite browser by goin...

1. Pull the flap on the front of the stat down exposing all of the settings buttons. 2. Press "run schedule" and "copy" at the same time. 3. Scroll through the options with the "i" button just bel...

To subscribe to alarms and alerts, go to the Settings/Alarms tab, add the email address you would like to receive alarms and/or the phone number you would like to receive SMS alerts, choose the ale...